Comb. Deck
Slope: 1/2:12 (AC-1)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Isocyanurate insulation board mechanically fastened.
3. *1-Ply "#501", "#503", "#508", "#515", "#602", "#603", "#605 Panoply", mechanically fastened, fully adhered with ASTM-D312 roofing asphalt, "#1000 ESHAvent" self-adhesive base sheet.
4. *1-, 2-, 3-Plies "#500", "#506" ply sheet, "#501" or "#503" base sheet, hot mopped. Coated with "Malarkey Asphalt", ASTM-D1227 asphalt emulsion at 4 gal./sq.

Comb. Deck
Slope: 1:12 (AC-2)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 2 Plies of "#501", "#503" or "#515" base sheet (ASTM-D4601) mechanically attached.
3. 1 Ply of "#160 APP", torched.
4. 2 Gallons per 100 sq./ft. of "#726 Aluminum Coating" (per ASTM-D2824 Type III).

Comb. Deck
Slope: 1-1/2:12 (AC-3)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1 Ply of "#1000 ESHA Vent®" self adhesive base sheet, glued.
3. 1 Ply of "#161 APP" cap sheet, torched.

Comb. Deck
Slope: 1:12 (AC-4)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1 Ply of #501, "#503" or #515.
3. 1 Ply of #159 APP, torched base sheet.
4. 1 Ply of #160 APP, torched base sheet.
5. 2 Gallons of Aluminum Coating.

Comb. Deck
Slope: 1/2:12 (AC-5)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503", "#515", "#602", "#603", "#605 Panoply" base sheet, hot mopped, mechanically fastened.
3. *1-, 2-, 3-Plies of "#500", "#506" ply sheets, hot mopped.
4. *1-Ply "#601 Premium" cap sheet, hot mopped.

Comb. Deck
Slope: Unlimited (AC-6)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *"#230" Alaskan SBS Modified Fiberglass Shingles, installed per manufacturer's instructions.

Note: This system is ASTM-D3161 Wind Resistance rated up to 110 mph. In addition, it has been tested to UL-2218, and it has achieved a class 4 impact resistance rating under criteria established by the Texas Department of Insurance.

Comb. Deck
Slope: Unlimited (AC-7)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. "#240 Hurricane" SBS Modified Fiberglass Shingles, installed per manufacturer's instructions.

Note: This system is ASTM-D3161 Wind Resistance rated up to 110 mph. In addition, it has been tested to UL-2218, and it has achieved a class 4 impact resistance rating under criteria established by the Texas Department of Insurance.

Comb. Deck
Slope: 1/2:12 (AC-8)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *Optional - 1-Ply "#501", "#503", "#602", "#603", "#605" base sheet, mechanically attached or fully adhered with "#705", ASTM-D3019 cold process adhesive, ASTM-D312 roofing asphalt, hot mopped, 1-ply "#1000 ESHAvent®" self-adhesive base sheet.
3. *1-Ply "#602", "#603", "#605" or 2-Plies "#501" or "#503" base sheet, mechanically fastened or fully adhered with "#705", ASTM-D3019 cold process adhesive, ASTM-D312 roofing asphalt, hot mopped, 1-Ply "#1000 ESHAvent®" self-adhesive base sheet.
4. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D3019 cold process adhesive, ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (AC-9)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-, 2-, 3-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, mechanically fastened, or fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *1-Ply "#917 Polyglass" cap sheet, torched down or fully adhered with "#705", ASTM-D3019 cold process adhesive, roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (AC-10)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-, 2-, 3-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, mechanically fastened, or fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *1-Ply "#919 Polyglass" cap sheet, torched down or fully adhered with cold process adhesive or roofing asphalt, hot mopped.
4. Manufacturer specified water based emulsion coating meeting ASTM-D1227 specifications.

Comb. Deck
Slope: 1/2:12 (AC-11)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *2-, 3-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (AC-12)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503" fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *2-Plies "#603", fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. Surfaced with ASTM-D1227 asphalt emulsion applied at a minimum coverage rate of 3 gal./sq.

Comb. Deck
Slope: 1/4:12 (AC-13)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *3-, 4-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with "#705" Adhesive, or ASTM-D3019 cold process adhesive applied at a coverage rate of 2 gal./sq. each ply.
3. *Coated with "#705 Adhesive", or ASTM-D3019 cold process adhesive, at 2 gal./sq. and embedded with 3M Brand No. 11 roofing granules at a minimum coverage rate of 60 lbs./sq.
OR
4. *Coated with "#705 Adhesive", or ASTM-D3019 cold process adhesive, at 4 gal./sq. and embedded with roofing gravel ballast at a minimum coverage rate of 400 lbs./sq.

Comb. Deck
Slope: 2:12 (AC-14)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503", "#515" base sheet or inverted "#502" cap sheet, mechanically fastened (optional when minimum 1/2" insulation board is applied).
3. *2-, 3-Plies "#501" or "#503" base sheet, "#500", "#506" ply sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. *1-Ply "#350", "#502" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (AC-15)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503", "#602", "#603", "#605 Panoply" glass fibered base sheet, mechanically fastened.
3. *1-Ply "#919 Polyglass" cap sheet, fully adhered with ASTM-D312 Type III roofing asphalt, hot mopped, or "#705" or ASTM-D3019 cold process adhesive.
4. Surfaced with "Malarkey" aluminum roof coating applied at a minimum coverage rate of 1-1/2 gal./sq.

Comb. Deck
Slope: Unlimited (AC-16)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *3-, 4-Plies "#501", "#503", "#515", "#602", "#603", "#605 Panoply" base sheet, fully adhered each ply with ASTM-D312 roofing asphalt or "#705" adhesive or ASTM-D3019 cold process adhesive.
3. Flood coated with roofing asphalt or adhesive and embedded with nominal 3/8" pea gravel at a minimum coverage rate of 150 lbs./sq.
4. Optional - "Heatshield" primer and rock bonder applied at a coverage rate of 1 gal./sq.
5. Surfaced with "Heatshield" cementitious coating per manufacturers' instructions.

Comb. Deck
Slope: 1:12 (AC-17)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503", "#515", "#602", "#603", "#605 Panoply" base sheet, mechanically fastened, or fully adhered with "#705" or ASTM-D3019 cold process adhesive or ASTM-D312 roofing asphalt, hot mopped, or 1-Ply "#1000 ESHAvent®" self-adhesive base sheet.
3. Optional - 1-Ply "#500", "#506" ply sheet or "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with "#705" or ASTM-D3019 cold process adhesive or ASTM-D312 roofing asphalt, hot mopped.
4. *1-Ply "#917 Polyglass" cap sheet, fully adhered with "#705" or ASTM-D3019 cold process adhesive or ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 2:12 (AC-18)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *"#1000 ESHAvent®" thermally adhered roofing membrane.
3. *1-Ply Item "#500" ply sheet, hot mopped with ASTM-D312 asphalt.
4. *1-Ply of "#601", "#350", "#502", "#917", "#919" cap sheet.

Comb. Deck
Slope: 3:12 (AC-19)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. * 3-, 4-Plies "#500", "#503", "#506" ply sheet or "#501", "#515", "#602", "#603", "#605 Panoply", mechanically fastened or fully adhered first ply, subsequent plies fully adhered with cold process adhesives or ASTM-D312 roofing asphalt.
3. Roofing gravel ballast applied at a minimum 400 lbs./sq. into flood coat of cold process adhesive or roofing asphalt.

Comb. Deck
Slope: N/A (AC-20)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *"#210 PRO-25" SBS Modified Fiberglass Shingles, installed per manufacturer's instructions.

Note: This system is ASTM-D3161 Wind Resistance rated up to 60 mph.

Comb. Deck
Slope: Unlimited (AC-21)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Approved underlayment installed per manufacturer's instruction.
3. #272 Legacy SBS Modified Laminated Shingles, mechanically attached.

Note: This system has been tested to UL-2218, and it has achieved a class 4 impact resistance rating under criteria established by the Texas Department of Insurance. This system is ASTM-D3161 Wind Resistance rated up to 110 mph.

Comb. Deck
Slope: Unlimited (AC-22)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. #270 Northwest XL Shingles or #271 Highlander CS Laminated Shingles, mechanically attached.

Note: This system with #271 Highlander CS Laminated Shingles are is ASTM-D3161 Wind Resistance rated up to 80 mph. The system with #270 Northwest XL Laminated Shingles are ASTM-D3161 Wind Resistance rated up to 110 mph.

Comb. Deck
Slope: Unlimited (AC-23)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *"#250 Monterey" SBS modified fiber glass shingles, installed per manufacturer's instructions.

Comb. Deck
Slope: 1:12 (AC-24)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1- or more Plies "#501", "#515", "#602", "#603", "#605 Panoply" base sheet mechanically attached or fully adhered with ASTM-D312 roofing asphalt, hot mopped, or 1-Ply of "#1000 ESHAvent®", self-adhesive base sheet.
3. *1- or more Plies "#500", "#506" ply sheet, "#501", "#515", "#602", "#603", "#605 Panoply" fully adhered with ASTM-D312 roofing asphalt, hot mopped. Optional when insulation is used.
4. *1-Ply "#650 Panoply", "#625 Paragon" SBS cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: Unlimited (AC-25)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, mechanically fastened or fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *1- or more Plies "#500", "#506" ply sheet or "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped. Optional when insulation is used.
4. *1-Ply "#1020 ESHAlum®", fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1-1/2:12 (AC-26)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Two plies of #501, "#503" or #515 base sheet ASTM-D4601, mechanically fastened.
3. One ply of #161 APP cap sheet, torched.

Comb. Deck
Slope: 1:12 (AC-27)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. One ply of #1000 ESHA Vent self adhesive base sheet, glued.
3. One ply of #159 APP base sheet, torched.
4. One ply of #160 APP ply sheet, torched.
5. Two gallons per 100 sq.ft. of #726 Aluminum Coating per ASTM-D2824 Type III.

Comb. Deck
Slope: 1:12 (AC-28)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Two plies of #501, "#503" or #515 base sheet ASTM-D4601 mechanically attached.
3. One ply of #159 APP base sheet, torched.
4. Two gallons per 100 sq.ft. of #726 Aluminum Coating per ASTM-D2824 Type III.

Comb. Deck
Slope: 1-1/2:12 (AC-29)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. One ply of #501, "#503" or #515 base sheet ASTM-D4601 mechanically attached.
3. One ply of #159 APP base sheet, torched.
4. One ply of #161 APP cap sheet, torched.

Comb. Deck
Slope: 2:12 (AC-30)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Minimum 1/4" thick Dens Deck, mechanically fastened or applied in hot asphalt.
3. *"Sealoflex Pink", applied at a coverage rate of 2.5 gal/100 sq.ft.
4. *"Sealoflex Fabric", imbedded per manufacturer's instruction.
5. *"Sealoflex Finish Coat", applied at a coverage rate of 1.43 gal/100 sq.ft.

Comb. Deck
Slope: 2:12 (AC-31)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1-Ply "#501", "#503", "#515" base sheet, or inverted "#502" cap sheet, mechanically fastened.
3. 1 or more Plies, "#501" or "#503" base sheet, "#500", "#506" ply sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. 1-Ply "#350", "#502" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1:12 (AC-32)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1-Ply #1000 ESHA Vent self adhesive base sheet, glued.
3. 1-Ply #159 APP base sheet, torched.
4. 1-Ply #161 APP cap sheet.

Comb. Deck
Slope: 1:12 (AC-33)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1-Ply of "#501" UDL underlayment or inverted "#502" cap sheet, mechanically fastened.
3. 1-Ply of "#501" SBS base sheet adhered with "#727" modified bituminous adhesive, and coated with "#727" modified bituminous adhesive.
4. "#750" non-fibered adhesive applied at 9 gallons/100 sq.ft.
5. 2 gallons per 100 sq.ft. of "#726" aluminum coating per ASTM-D2824 Type III.

Non-Comb. Deck
Slope: 1:12 (AN-1)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1-Ply "#1000 ESHAvent®" thermally adhered.
3. 3-Plies "#500 Fiberglass" ply sheet, hot mopped with ASTM-D312 roofing asphalt.
4. Roofing gravel ballast applied at a minimum 400 lbs./sq. into flood coat of cold adhesive or ASTM-D312 roofing asphalt.

Non-Comb. Deck
Slope: 2:12 (AN-2)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *Optional - 1-Ply "#501", "#503", "#515", "#602", "#603", "#605 Panoply" base sheet.
3. *1-Ply "#602", "#603", "#605 Panoply", or 2-Plies "#501" or "#503" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. 1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped, or "#705" or ASTM-D3019 cold process adhesive at 2 gal./sq.

Non-Comb. Deck
Slope: 1/2:12 (AN-3)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *Optional - 1-Ply "#1000 ESHAvent®" self-adhesive base sheet.
3. *3-, 4-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with "#705" Adhesive or hot mopped with ASTM-D312 roofing asphalt each ply.
4. Coated with ASTM-D1227 roofing asphalt emulsion at a minimum of 3 gal./sq.
5. Optional Surfacing - "Malarkey", ASTM-D2824 aluminum roof coating applied at a minimum coverage rate of 1-1/2 gal./sq.

Non-Comb. Deck
Slope: 1/2:12 (AN-4)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-, 2-, 3-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped, or 1-Ply "#1000 ESHAvent®" self-adhesive base sheet.
3. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Non-Comb. Deck
Slope: 1/2:12 (AN-5)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *3-, 4-Plies "#501", "#503", "#602", "#603", "#605 Panoply" glass fibered base sheet, mechanically fasten first ply, fully adhere subsequent plies with either:
a. Type III roofing asphalt OR
b. Approved cold process adhesive(s).
3. Surfaced with roofing gravel ballast at a minimum coverage rate of 400 lbs./sq. embedded into a flood coat of one of the adhesive systems noted above.

Non-Comb. Deck
Slope: 1/2:12 (AN-6)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Optional - 1-Ply "#501", "#503", "#602", "#603", "#605 Panoply" base sheet or "#1000 ESHAvent®" self-adhesive base sheet.
3. *1-Ply "#602", "#603", "#605 Panoply" or 2-Plies "#501" or "#503" glass fiber base sheet, mechanically fastened or fully adhered with ASTM-D312 asphalt, hot mopped.
4. *1-Ply "#601 Premium" cap sheet, fully adhered with approved cold process adhesive or fully adhered with ASTM-D312 asphalt, hot mopped.

Non-Comb. Deck
Slope: 2:12 (AN-7)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Optional min. 1/4" thick Dens Deck, mechanically fastened or applied in hot asphalt.
3. *"Sealoflex Pink", applied at a coverage rate of 2.5 gal/100 sq.ft.
4. *"Sealoflex Fabric", imbedded per manufacturer's instruction.
5. *"Sealoflex Finish Coat", applied at a coverage rate of 1.43 gal/100 sq.ft.

Non-Comb. Deck
Slope: 2:12 (AN-8)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Min. 1/4" thick Dens Deck, mechanically fastened or applied in hot asphalt.
3. *"Sealoflex Pink", applied at a coverage rate of 2.5 gal/100 sq.ft.
4. *"Sealoflex Fabric", imbedded per manufacturer's instruction.
5. *"Sealoflex Finish Coat", applied at a coverage rate of 1.43 gal/100 sq.ft.

Non-Comb. Deck
Slope: 1/2:12 (AN-9)

1. Optional Insulations: Manufacturer specified, certified insulations..
2. *1-Ply "#501", "#503", "#602", "#603", "#605 Panoply" glass fiber base sheet, mechanically fastened, or fully adhered with cold process adhesive, or "#1004 ESHAvent®" self-adhesive base sheet.
3. *2-Plies "#501", "#503", "#602", "#603", "#605 Panoply" glass fiber base sheet fully adhered with cold process adhesive at 1-1/2 gal./sq. each ply, or fully adhered with ASTM-D312 asphalt, hot mopped.
4. Manufacturer specified non-fibered emulsion coating at 3 gal./sq.
5. 3M Brand Roofing Granules embedded at 50 lbs./sq.

Non-Comb. Deck
Slope: 3:12 (AN-10)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *Optional Base Sheet - 1-Ply "#501", "#503", "#508", "#515", "#602", "#603", "#605 Panoply" fully adhered with ASTM-D312 roofing asphalt, hot mopped, or 1-Ply "#1000 ESHAvent®" self-adhesive base sheet.
3. *2-, 3-, 4-Plies "#500", "#506" ply sheet or "#501", "#503", "#602", "#603", "#605 Panoply" base sheet fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. Flood coat with ASTM-D312 roofing asphalt, gravel ballast at 400 lbs./sq.

Non-Comb. Deck
Slope: 3:12 (AN-11)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-, 2-, 3-Plies "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
3. *1-Ply "#917", "#919 Polyglass" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. Flood coat with ASTM-D312 roofing asphalt.
5. Pea gravel ballast at 400 lbs./sq.

Non-Comb. Deck
Slope: 1/2:12 (AN-12)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Malarkey #502 Base Sheet, inverted, mechanically attached.
3. Malarkey #919 Ply Sheet, hot mopped with ASTM-D312 asphalt.
4. Malarkey #917 Cap Sheet, hot mopped with ASTM-D312 asphalt.

Non-Comb. Deck
Slope: 2:12 (AN-13)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. Optional min 1/4" thick Dens Deck, mechanically fastened or applied in hot asphalt.
3. *"Sealoflex Pink", applied at a coverage rate of 2.5 gal/100 sq.ft.
4. *"Sealoflex Fabric", imbedded per manufacturer's instruction.
5. *"Sealoflex Finish Coat", applied at a coverage rate of 1.43 gal/100 sq.ft.

Non-Comb. Deck
Slope: 2:12 (AN-14)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *"Sealoflex Pink", applied at a coverage rate of 2.5 gal/100 sq.ft.
3. *"Sealoflex Fabric", imbedded per manufacturer's instruction.
4. *"Sealoflex Finish Coat", applied at a coverage rate of 1.43 gal/100 sq.ft.

Non-Comb. Deck
Slope 5:12 (Unlimited) (AN-15)

1. Base Layer: 2" thick "nail base" insulation mechanically attached to a steel substrate (deck).
2. Intermediate Layer: One layer of Type 15 or Type 30 asphalt saturated felt.
3. Cap Layer: One layer of "Alaskan" shingles, installed per manufacturer's installation instructions.

Comb. Deck
Slope: 1/2:12 (BC-1)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#919" smooth cap sheet, torched down.
3. *Coated with "Rhino-Hide Ti-Cote" at 4 gal./sq.

Comb. Deck
Slope: 1:12 (BC-2)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. 1 Ply of #501, "#503" or #515 Base Sheet, mechanically attached.
3. 1 Ply of #160 APP, torched.
4. 2 gallon per 100 sq.ft. of #726 Aluminum Coating per ASTM-D2824 Type III.

Comb. Deck
Slope: 1/2:12 (BC-3)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *2-Plies "#500", "#506" ply sheet, or "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, hot mopped with ASTM-D312 roofing asphalt.
3. Coated with ASTM-D1227 emulsified asphalt at 3 gal./sq.

Comb. Deck
Slope: 1/2:12 (BC-4)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (BC-5)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *2- or more Plies "#501", "#503", "#602", "#603", "#605 Panoply" glass fiber base sheet, fully adhered with cold process adhesive at 1-1/2 gal./sq. each ply.
3. Coated with ASTM-D1227 asphalt emulsion at 3 gal./sq.
4. 3M Brand Roofing Granules embedded at 50 lbs./sq.

Comb. Deck
Slope: 2:12 (BC-6)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *Optional - 1-Ply "#501", "#503", "#602", "#603", "#605 Panoply" base sheet.
3. *1-Ply "#602", "#603", "#605 Panoply" or 2-Plies "#501" or "#503" base sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.
4. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1/2:12 (BC-7)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. *1- or more Plies, "#501", "#503", "#602", "#603", "#605 Panoply" base sheet, mechanically fastened or fully adhered with "#705" or ASTM-D3019 cold process adhesive, or ASTM-D312 roofing asphalt, hot mopped.
3. *1-Ply "#601 Premium" cap sheet, fully adhered with ASTM-D3019 cold process adhesive, or ASTM-D312 roofing asphalt, hot mopped.

Comb. Deck
Slope: 1-1/2:12 (BC-8)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. One ply of #501, "#503" or #515 base sheet ASTM-D601 mechanically attached.
3. One ply of #161 APP cap sheet, torched.

Comb. Deck
Slope: 1:12 (BC-9)

1. Optional Insulations: Manufacturer specified, certified insulations.
2. One ply of #1000 ESHA Vent self adhesive base sheet glued.
3. One ply of #160 APP ply sheet, torched.
4. Two gallons per 100 sq.ft. of #726 Aluminum Coating per ASTM-D2824 Type III.